IoT Monitoring Alert Guide
Interpret floor-level Cisco Spaces IoT monitoring alerts and decide what to investigate next.
What the alert covers #
The alert summarizes Cisco Spaces IoT health for a selected monitoring scope. That scope may be a building, network, or floor. It is designed to answer which floors have APs out of compliance, which monitoring concept is affected, and whether the issue should be watched or escalated. Each table row represents a floor and the TOTAL row summarizes the full monitored scope.
Header #
The header identifies the tenant and monitored location, the completion time, a link to the full execution report, and the thresholds used to evaluate the run.
Table and count columns #
| | | IOx App | Beacon | Sync |
|Floor | APs | Noncomp. | N | O | C | Alrt | Noncomp. | N | O | C | Alrt | Bad | State | Alert
|---------------------+-----+----------+---+---+---+------+----------+---+---+---+------+--------+-------+------
|Example Floor A | 44 | 6 (14%) | 2 | 3 | 1 | ❌ | 5 (11%) | 1 | 1 | 3 | ❌ | 0 (0%) | ✅ | ❌
|Example Floor B | 22 | 2 (9%) | 0 | 0 | 2 | ⚠️ | 1 (5%) | 0 | 0 | 1 | ⚠️ | 0 (0%) | ✅ | ✅
|TOTAL | 66 | 8 (12%) | 2 | 3 | 3 | ❌ | 6 (9%) | 1 | 1 | 4 | ❌ | 0 (0%) | ✅ | ❌
For count columns, zero is good. APs is the floor inventory. Noncomp. is the affected AP count and percentage. N means newly noncompliant, O means an older condition, and C means a configuration or not-evaluable issue.
Sync Bad identifies recent channel values that disagree. Alert is the overall floor result.
Values and icons #
A value such as 1 (2%) means one affected AP, representing two
percent of the inventory on that floor. Percentages are relative to the floor,
not the full building or network, so a concept can be healthy on one floor and
critical on another.
- ✅: no issue for the concept on that floor.
- ⚠️: issues exist but remain below the configured threshold.
- ❌: the floor breached the configured threshold.
- 🚧: alerting is suppressed for maintenance while data remains visible.
Follow-up guidance #
- Start with floors showing a red overall Alert icon.
- IOx and beacon failures on the same floor are stronger evidence of a floor-wide issue.
- A large C count usually indicates configuration debt rather than a new outage.
- Sync-only problems are primarily a data-quality warning.
Detailed execution report #
- Run Summary: tenant, account context, monitored location, timestamps, and status.
- Current Totals: AP inventory and current IOx, radio, beacon, and connector counts with previous-run values.
- Connector Overview: per-connector and per-instance node, channel, service-manager, IoT-service, and API issue state.
- Alert Delivery: sent, suppressed, partially delivered, or failed state with per-destination detail.
- Flagged Issues: detected events followed by floor-level new and existing/configuration issues with expandable raw AP detail.
- Captured Tracebacks: collection and processing exceptions grouped by source.
- Stored Result Payload: persisted JSON for advanced troubleshooting and engineering review.
Start with Flagged Issues for AP-level triage and Captured Tracebacks for collection or API failures.
IOx App Down is based on IOx application channel timing. It does not necessarily mean that the AP itself is powered off or unreachable.
The alert is a high-level triage tool. The execution report remains the source of full monitoring detail for the run.
Beacon compliance depends on tenant-level indoor-navigation beacon settings being defined in the monitoring profile.